Allied-telesis AT-S70 Uživatelský manuál Strana 168

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 302
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 167
Chapter 9: SNMPv3
168
To display the Display SNMPv3 View Table menu, perform the following
procedure.
1. From the Main Menu, select System Configuration.
The System Configuration Menu is displayed, as shown in Figure 10
on page 46.
2. From the System Configuration menu, select SNMPv3
Configurations.
The SNMPv3 Configurations menu is displayed, as shown in Figure 61
on page 147.
3. From the SNMPv3 Configurations menu, select Configure SNMPv3
View Table.
The Configure SNMPv3 View Table menu is displayed, as shown in
Figure 65 on page 160.
4. From the Configure SNMPv3 View Table menu, select Display
SNMPv3 Table Entry.
The Snmpv3 View Info menu is displayed, as shown in Figure 67.
Figure 67. SNMPv3 View Info Menu
Note
The Row Status parameter is a read-only field. The Active value
indicates the SNMPv3 User Table entry takes effect immediately.
Note
To display the SNMPv3 View information, type N to display the Next
View, F to display the First View, or R to return to the previous
menu.
Converteon
SNMPv3 View Info:
View Name ................. internet
Subtree OID ............... .1.3.6.1.2.1.6
Subtree Mask .............. ff
View Type ................. Included
Storage Type .............. NonVolatile
Row Status ................ Active
N - Next View, F - First View, R - Return
Zobrazit stránku 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 301 302

Komentáře k této Příručce

Žádné komentáře