Allied-telesis AT-MR820TR Uživatelský manuál stáhnout pdf (Strana 31)

AT-MR420TR and AT-MR820TR Installation Guide

Connections

The AT-MR420TR/AT-MR820TR Micro Repeaters have the following

connectors:

❑ RJ45

❑ AUI

❑ BNC

RJ45 Ports

Attach an RJ45 10Base-T STP/UTP cable to port 1. The respective

segment LINK OK LED located on the front panel should light when

the 10Base-T network adapter card in the device on the opposite end of

the STP/UTP segment is operational. If not, check that the card on the

opposite end of the STP segment is operational, then ensure that the

proper cable is being used.

Attach a second 10Base-T STP RJ45 connector to 10Base-T network

port 2. The port 2 LINK OK LED on the front panel should light,

provided the 10Base-T device on the opposite end of the STP/UTP cable

is operational.

AUI Network Port

Each AT-MR420TR/AT-MR820TR Micro Repeater has one AUI port to

accommodate a 10Base5 (standard or thick Ethernet cable) connection

to the network backbone using an AUI or convert the media type, for

example fiber optics.

BNC Network Port

Each AT-MR420TR/AT-MR820TR Micro Repeater has one BNC port

to accommodate a 10Base2 (cheapernet or thin Ethernet cable)

connection to the network backbone.

MRx20TR(STP/UTP)_BookA Page 9 Thursday, April 3, 1997 5:24 PM

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 71 72

Žádné komentáře

Allied-telesis AT-MR820TR Uživatelský manuál Strana 31