Allied-telesis AT-GS924M Uživatelský manuál stáhnout pdf (Strana 47)

AT-GS908M, AT-GS916M, and AT-GS924M Switches Installation Guide

Powering On the Switch

To power on the switch, perform the following procedure:

1. Lift up the retaining clip and insert the power cord into the AC power

connector on the back of the switch, as shown in Figure 15.

Figure 15. Plugging in the AC Power Cord

2. Lower the retaining clip over the AC Power Cord as shown in

Figure 15.

3. Plug the other end of the power cord into a wall outlet.

Warning

Power cord is used as a disconnection device. To de-energize

equipment, disconnect the power cord.  E3

Note

Pluggable Equipment. The socket outlet shall be installed near the

equipment and shall be easily accessible.  E5

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54

Žádné komentáře

Allied-telesis AT-GS924M Uživatelský manuál Strana 47