Allied-telesis AT-8550 Uživatelský manuál Strana 16

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 15
Access Policy Commands
14
Access Policy Commands
Command Description
config access-profile <access_profile> add
{vlan <name> | ipaddress <ipaddress>
<subnet_mask>
Adds an IP address or VLAN name to the access profile. The entry
must be of the same type as the access profile (for example, IP
address).
config access-profile <access_profile> delete
{vlan <name> | ipaddress <ipaddress>
<subnet_mask>
Deletes an IP address or VLAN name from the access profile.
config access-profile <access_profile> mode
[permit | deny]
Configures the access profile to be one of the following:
permit Allows the addresses that match the access profile
description.
deny — Denies the addresses that match the access profile
description.
The default setting is permit.
create access-profile <access_profile> type
[vlan | ipaddress]
Creates an access profile. Once the access profile is created, one or
more addresses can be added to it, and the profile can be used to
control a specific routing protocol
delete access-profile <access_profile> Deletes an access profile.
show access-profile <access_profile> Displays access-profile related information for the switch.
Zobrazit stránku 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Komentáře k této Příručce

Žádné komentáře