Allied-telesis AT-8126XL Uživatelský manuál stáhnout pdf (Strana 32)

Installation

2-10

Setting Up The Terminal for Local Management Using Omega

1. Connect your terminal to the RS232 connector on the switch’s

front panel. Use an RS232, DB-9 straight-through cable.

2. Access your terminal emulation program, i.e., VT100.

3. Set your terminal emulator to the following:

— Data bits:

— Stop bits:

— Parity:

None

— Baud rate:

9600

4. Press

Return

The switch runs diagnostics and shortly displays the Omega

main menu.

You are now ready to access the switch’s management software,

Omega. The software comes with the default settings listed in

Appendix C.

If you intend to manage the switch from a remote site, or if you are in

a TCP/IP environment, you must first assign an IP address to the

switch using local Omega.

For remote management and further details concerning the Omega

management software, refer to the

AT-S21 Software Management

User’s Guide

. Download this guide from the web at

www.alliedtelesyn.com

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Žádné komentáře

Allied-telesis AT-8126XL Uživatelský manuál Strana 32